LEADING THE WORLD IN THE MANUFACTURE OF METAL ROOFING COMPONENTS
EVERYTHING FOR THE METAL ROOFER
CALL US AT
800.943.9771
amsi roof panel clips link
amsi tools link
amsi s5 clamps link
amsi s5 pv kits link
amsi screws link
amsi sealants link
amsi pipe boots link
amsis metal roofing link
amsi copper goods link
amsi gutter components link
amsi fabrication link
<empty>amsi safety equipment link
amsi snow retention link
amsi about us link
amsi conact us link
amsi catalog link
amsi downloads page link
amsi news link

ULTRASEAM

METAL ROOFING & SIDING SYSTEMS

Ultra Seam US100CS Snap-On-Seam Roof Panel

Our Snap-On-Seam Cap panel has a single upstanding leg on each side. After a panel is laid, the clips are installed up against the panel leg, with half of each clip folded over the leg. The adjacent panel is then laid up against the clips, and the other half of each clip is folded down. Finally the batten cap is snapped down over all clips in the seam along the entire length of the panel. The panels are now securely attached with the completed seam enclosing all clips. Seams require no machine closing and rapid installation means low in-place cost. Also available in 1-1/2" rib height (US-150CS). Cap Seam panel can also be curved or tapered. These panels create an architecturally desirable look without jeopardizing the integrity of the roof panel. The installation of the curved cap seam panel (US-100 CCS) and the tapered cap seam panel (US-100 TCS) is the same as the straight cap seam panel (US-100 CS).

Mrs. Winners Restaurant - Riverdale, GA Commercial Project - Dallas, GA Private Residence - Douglasville, GA
Private Residence - Douglasville, GA Private Residence - Douglasville, GA Private Residence - Atlanta, GA
Private Residence - Atlanta, GA Douglas Co. Courthouse - Douglasville, GA Douglas Co. Courthouse - Douglasville, GA
Bank - Cartersville, GA Bank - Cartersville, GA
Website and all contents Copyright2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 AMSI SUPPLY (Architectural Metal Specialties, Inc)