Malco LOGO

AMSI supply is proud to carry Malco® sheet metal tools. Whether you are looking for Aviation Snips, Turbo Shears or any other cutting or bending tool, AMSI has got you covered.

Malco Products, SBC. got its start in 1950 when a young steel supply salesman, Mark W.Keymer, decided to manufacture and market a pipe crimper he had invented for use in installing the “new” sheet metal ductwork used with forced air heating systems.

More tools soon followed, including the first-hand seamer to employ compound leverage; a time-saving hand notcher that made a V-shaped cut in one motion; and a hand operated, snap lock punch to complete the basic sheet metal tool set. Metal duct fabrication could now be done easily at the job site and the tools were well received by contractor-installers.

The early product line of crimpers, seamers, notchers and punches has since been joined by hundreds of other specialty tools, and Malco is still known for regularly introducing exciting new hand tool designs and modifications for the markets it serves

Shop our complete line of Malco® metal roof working tools

Malco PRODUCTS

AVIATION SNIPS

Malco Products, Inc., headquartered in Annandale, Minnesota, USA, was founded in 1950 and was a pioneer with its innovative specialty hand tools for the HVAC trade. Today Malco is the nation’s largest manufacturer of “tools for the trade” for this industry. Beginning in 1975, Malco created a speciality tool market for the roofing, siding and gutter industry.

MALCO MAX2000 AVIATION SNIPS

Part Number Description Cut Cut Length Capacity Order
M2001Malco-M2001Left-Cut-Arrow1.38"
(35.0mm)
18ga C.R.S.
20ga S.S.

$26.50Read more

M2002Malco-M2002Right-Cut-Arrow1.38"
(35.0mm)
18ga C.R.S.
20ga S.S.

$26.50Read more

M2003Malco-M2003Center-Cut-Arrow1.687"
(42.86 mm)
18ga C.R.S.
20ga S.S.

$26.50Read more

M2005Malco-M2005Straight-Arrow-21.06"
(26.9 mm)
18ga C.R.S.
20ga S.S.

$28.00Read more

OFFSET AVIATION SNIPS

Malco Products, Inc., headquartered in Annandale, Minnesota, USA, was founded in 1950 and was a pioneer with its innovative specialty hand tools for the HVAC trade. Today Malco is the nation’s largest manufacturer of “tools for the trade” for this industry. Beginning in 1975, Malco created a specialty tool market for the roofing, siding and gutter industry.

Malco Max2000 Offset Snips

Part Number Description Cut Cut Length Capacity Price Each
M2006Malco-M2006Turbo-left-cut-arrow1.25"
(31.8mm)
18ga C.R.S.
20ga S.S.
Call for Pricing
M2007Malco-M2007Turbo-right-cut-arrow1.25"
(31.8mm)
18ga C.R.S.
20ga S.S.
Call for Pricing

SEAMING PLIERS

Malco Seamers feature drop-forged high impact steel jaws and hardened steel handles with non-slip vinyl grips to provide comfort and control. Jaws also feature vee-notched graduations at 1/4" increments

SEAMING PLIERS BY MALCO

Part Number Description Jaw Depth Jaw Width Price Each
S2RMalco 3" Seamer Straight1-1/4"3-1/4"

$52.30$74.40Select options

S3RMalco 3" Seamer Offset1-1/4"3-1/4"

$52.30$74.40Select options

S6RMalco 6" Seamer Straight1-1/4"6"

$52.30$74.40Select options

S9RMalco 6" Seamer Straight1-1/4"9"

$52.30$74.40Select options

S2R

S3R

S6R

ONE-INCH NOTCHER

The MALCO N2R Notcher punches a big 1" (25.4mm) deep "V" notch in common 24 to 30 ga ( 0.71-0.41mm) gauge galvanized sheet metal quickly & easily.

Can also be used in copper up to 0.023" thick and aluminum up to 0.035" thick

NOTCHER BY MALCO

Part Number Description Price Each
N1RMalco N1 Notcher 13/16" Throat Depth

$45.00Read more

N2RMalco Hand Notcher 1" Throat Depth

$54.40Read more

N2R

FORGED STEELSNIPS

Malco Forged Steel Snips are designed to perform a variety of tasks.

M9 Forged Steel Regular Pattern Snips are designed for cutting straight lines and wide curves.

M15 Forged Steel Bulldog Pattern Snips are big, powerful and designed specifically for straight cuts and notching.

MD10 and MD12 Forged Steel Circular "Duckbill" Snips maneuver easily and cut to the very tip of the blad

MALCO TURBOSHEAR ORIGINAL / HD

Part Number Cut Cut Length Price Each
MD10Center-Cut-Arrow2.5" (63.5mm)

$21.45Read more

MD12Center-Cut-Arrow3" (76.2mm)

$27.10Read more

M15Straight-Cut-Arrow3" (76.2mm)

$68.50Read more

TURBOSHEAR

The MALCO TurboShear Original makes your corded or cordless drill a power shear instantly!

  • Requires two (2) hands to operate
  • Optional Drill Clamp No. TSDC available for one handed operation
  • Blade cuts straight and to the left
  • Minimum 14.4 volt 3/8" cordless drill required
  • Jaw opening navigates tight curve patterns & squares
  • Blind cuts require a 1/2" starting hole

DOES NOT INCLUDE DRILL!

MALCO TURBOSHEAR ORIGINAL / HD

Part Number Description Capacity Price Each
TS1Malco TurboShear Original20ga Galv. Steel

$56.25Read more

TSHDMalco TurboShear Heavy Duty. Includes TSDC Drill Clamp Adapter18ga Galv Steel

$103.75Read more

TSDCTSDC Drill Clamp AdapterN.A.

$22.70Read more

TS1RBReplacement Blades for Turbo Shear OriginalN.A.

$29.70Read more

TSCMRBReplacement Blades for Turbo Shear Corrugated MetalsN.A.

$52.00Read more

TSHDRBReplacement Blades for TurboShear Heavy DutyN.A.

$44.65Read more

TS1

PATTERN SNIPS

Malco Products, Inc., headquartered in Annandale, Minnesota, USA, was founded in 1950 and was a pioneer with its innovative specialty hand tools for the HVAC trade. Today Malco is the nation’s largest manufacturer of “tools for the trade” for this industry. Beginning in 1975, Malco created a specialty tool market for the roofing, siding and gutter industry.

Malco Andy 12" & 14" Pattern Snips

Malco Andy Classic 12" & 14" Pattern Snips

Part Number Description Cut Cut Length Capacity Price Each
M12A12" Malco-M12ACenter-Cut-Arrow3.00"
(76.2 mm)
24ga C.R.S.
26ga S.S.
Call for Pricing
M14A14" Malco-M14ACenter-Cut-Arrow3.25"
(82.55 mm)
24ga C.R.S.
26ga S.S.

$38.10Read more

Malco Andy 12" Pattern Snips W/Comfort Grip

Part Number Description Cut Cut Length Capacity Price Each
M12NG12" Malco-M12NGCenter-Cut-Arrow3.00"
(76.2 mm)
24ga C.R.S.
26ga S.S.

$34.15Read more

Malco Andy 12" & 14" Combination Snips

Part Number Description Cut Cut Length Capacity Price Each
MC12N12" MC12NOmni-directional-arrow23.00"
(76.2 mm)
24ga C.R.S.
26ga S.S.

$38.55Read more

MC14N14" MC14NOmni-directional-arrow23.25"
(82.55 mm)
24ga C.R.S.
26ga S.S.

$42.70Read more

Malco Andy 12" & 14" Classic Combination Snips

Part Number Description Cut Cut Length Capacity Price Each
MC12A12" MC12AOmni-directional-arrow23.00"
(76.2 mm)
24ga C.R.S.
26ga S.S.

$38.55Read more

MC14A14" MC14AOmni-directional-arrow23.25"
(82.55 mm)
24ga C.R.S.
26ga S.S.

$42.70Read more

Malco Andy 12" Combination Snips w/Comfort Grip

Part Number Description Cut Cut Length Capacity Price Each
MC12NG12" MC12NGOmni-directional-arrow23.00"
(76.2 mm)
24ga C.R.S.
26ga S.S.

$42.00Read more

Andy Snips Replacement Blades

MALCO Replacement Blades for all ANDY Snips.

Andy Snips Replacement Blades

Part Number Description Price Each
M12NRBReplacement Blades M12N and M12NG Pattern SnipsCALL for Pricing
MC12NRBReplacement Blades MC12N and MC12NG Combination StripsCall for pricing
M12ARBReplacement Blades M12A Classic Pattern Strips

$16.50Read more

MC12ARBReplacement Blades MC12A Classic Combination Snips

$19.75Read more

M14NRBReplacement Blades M14N Classic Pattern Snips

$19.00Read more

MC14NRBReplacement Blades MC14N Classic Combination SnipsCall for Pricing
M14ARBReplacement Blades M14A Classic Pattern Snips

$19.00Read more

MC14ARBReplacement Blades MC14A Classic Combination SnipsCall for Pricing

Scratch Awl

Scratch Awl

Part Number Description Price Each
A1Large Grip Handle Scratch Awl 7/32 Blade Diameter

$4.00Read more

A2Large Grip Handle Scratch Awl 1/4 Blade Diameter

$6.60Read more

A3Large Grip Handle Scratch Awl 5/16 Blade Diameter

$10.50Read more

A3

Fiber Cement Siding Gauges

Fiber Cement Siding Gauges

Part Number Description Price Each
FCFGFiber Cement Siding Facing Gauge

$12.70Read more

FCG2Fiber Cement Siding Overlap Gauges(Pair)

$26.40Read more

FCFG

Economy Caulk Gun

An all-purpose caulk gun at a disposable price. Fits all standard 1/10 gallon caulk cartridges.

Malco Economy Caulk Gun

Part Number Description Order
CG10Economy Caulk Gun for all Standard Cartridges

$5.60Read more

Value Priced Caulk Gun

This moderately priced caulk gun has a stout metal frame, handy puncture wire and ladder size hang hook. Fits all standard 1/10 gallon caulk cartridges.

Malco Value priced Caulk Gun

Part Number Description Order
CG12Steel Frame Caulk Gun for all Standard Cartridges

$6.90Read more

CUSTOMERS WHO BOUGHT DEKS ALSO SEARCHED FOR