Clicky

Titebond Metal Roof Sealant | AMSI Supply

Shop

1″ Snaplock Clip
April 10, 2017
Show all
titebond sealant tubes

Titebond Metal Roof Sealant

$54.00


  • 12, 10.01oz tubes per case
  • 13 colors available
Clear
SKU: n/a. Category: .
Description
one_tube

Metal Roof Sealant

Titebond® WeatherMaster™ Metal Roof Sealant provides a weathertight seal against water, wind, dust and dirt. It offers exceptional  adhesion to Kynar™ coated metal materials, along with standard metal, aluminum, steel, galvanized bonderized surfaces, plastics and glass. The product is ideal for use on a wide variety of metal roof, trim,  architectural metal siding, aluminum, galvanized steel, galvanized  gutters, flashing and downspouts. It also provides unbeatable adhesion to wood, masonry, PVC and most common building materials.

Ready to Use
No mixing or primer required; reduces labor and installation cost

Ultra Low VOC
VOC-compliant in all 50 states

Joint Movement Capability ± 50% *
Remains permanently flexible

Weather Resistant
Produces long-lasting weather-tight seals

Paintable
May be painted with water based paints 1 hour after application‡

Wide Temperature Application Range
Suitable for all climates

Ideal Applications Include:

  • Metal roof
  • Trim
  • Architectural metal siding
  • General roofing applications
  • Galvanized gutters
  • Downspouts

* Titebond WeatherMaster Metal Roof Translucent (#61111) has 25% joint movement.
‡ Titebond WeatherMaster Metal Roof Translucent (#61111) is NOT paintable.

Specifications

Complies with the following requirements:

  • ASTM C920, Type S, Grade NS, Class 50†, Use NT, T, G, A and O
  • Federal Specification TTS-002230C, Type II Class A
  • Canadian Specification CAN/CGSB-19 13-M87, Classification MCG-2-40-A-N**
  • USDA approved for meat and poultry areas (white & colors)

Physical and Chemical Characteristics

Type: Advanced polymer

Reaactive VOC:
White & Colors – 9 g/L (<2% wt)
Translucent – 3 g/L (<0.3% wt.)

Weight per gallon:
White & Colors – 13.85 lbs.
Translucent – 8.41 lbs.

Tooling time: 10-15 minutes

Full cure: 24 hours

Freeze thaw stability: Stable

Flashpoint: Solvent free/Not applicable

Application temperature: Above 0°F

Joint movement capability:
White & Colors – ± 50%
Translucent – ± 25%

Storage life: 18 months in tightly closed containers below 75˚F

Coverage: 10.1 fl oz = 53 linear ft. at a 3/16” bead

Clean-up:
White & Colors – Isopropyl alcohol
Translucent – Mineral spirits or similar solvent

Paintable: After 1 hour‡

Tack-free time:
White & Colors – 20-30 min
Translucent – 15-20 min

Shore A:
White & Colors – 40-50
Translucent – 15-25

Solids: 99%

Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of labor. No other warranties are expressed or implied.

 

Application

Titebond WeatherMaster Metal Roof Sealant comes ready to use. Apply by professional cartridge gun. Extrude sealant into openings, gaps or holes surrounding the application. Fill joint opening to maximum capacity and repeat as necessary. Always apply sealant in a bead form. If joint depth exceeds 1/2”, use backing material. To ensure neat sealant lines, mask areas adjacent to joints. Once sealant is dry to the touch and does not transfer, remove masking tape. Painting may occur one hour after application with a water-based (latex-based) paint.‡ For other paint types, a compatibility test is recommended.

Limitations

  • Metal Roof Sealant is intended for exterior use. If light colors are used indoors, sealant must be painted.‡
  • Air, sealant and surface temperature should be above 0°F (-18°C). • Once sealant is applied, do not wipe with solvents.
  • Always apply sealant in a bead form.
  • If joint depth exceeds 1/2”, use backing material. • Not designed for continuous submersion or use below the waterline.
  • Do not apply Metal Roof Translucent to polycarbonate due to solvent cracking.
  • For questions, please call our Help Line 1.800.347.4583 or visit us at Titebond.com.

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact areas persists, contact physician. Product releases methanol§ during cure. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

† Titebond WeatherMaster Metal Roof Translucent (#61111) is Class 25
‡ Titebond WeatherMaster Metal Roof Translucent (#61111) is NOT paintable.
§ Titebond WeatherMaster Metal Roof Translucent (#61111) releases methyl ethyl ketoxime (MEKO) during cure.
** Titebond WeatherMaster Metal Roof Translucent (#61111) is Classification MCG-2-25-A-N

Additional information
Weight 20 lbs
Dimensions 8 x 6.5 x 12 in
Color

Translucent, Dark Bronze, Medium Bronze, Banner Red, Sandstone, Sierra Tan, Hartford Green, Classic Green, Slate Gray, Stone Gray, Silversmith, Bright Silver, Matte Black

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Titebond Metal Roof Sealant”

Your email address will not be published. Required fields are marked *