Clicky

S5V Clamps | AMSI Supply

S5V

S5V and S5V mini Clamps

The S-5-V clamp is a versatile clamp that fits vertical-folded seam profiles manufactured in North America—including most structural and architectural profiles.

Its simple design and generous dimensioning are what make the S-5-V clamp so versatile for use with the S-5!® snow retention products, such as ColorGard®, as well as with other heavy-duty applications.

Installation is as simple as setting the patented round point setscrews into the clamp, placing the clamp on the seam, and tightening them to the specified tension. Then, affix ancillary items using the stainless steel bolt provided with the product.

The S-5-Vclamp has been tested for load-to-failure results on a variety of horizontal standing seam roof profiles from leading panel manufacturers. To view test data, click here. Note: This link will take you to S-5!’s website.

S5V

S-5-V


The S-5-V is perfect for S-5!® snow retention products and other heavy-duty applications. The strength of the S-5-V clamp is in its simple design. The patented setscrews will slightly dimple the metal seam material but will not puncture it­—leaving roof manufacturers’ warranties intact.

S-5-V clamps are each furnished with the hardware shown above. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-V is compatible with most common metal roofing materials excluding copper. All included hardware is stainless steel.

S5V mini

Call for Info and Pricing

S-5-VMini


The S-5-V Mini is a bit shorter than the S-5-V and has one setscrew and one threaded bolt hole rather than two. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!*

*S-5!® mini clamps are not compatible with, and should not be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow retention systems.

S-5-V Mini clamps are each furnished with the hardware shown above. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-V is compatible with most common metal roofing materials excluding copper. All included hardware is stainless steel.

Installation

Installation is as simple as setting the patented round point setscrews into the clamp, placing the clamp on the seam, and tightening them to the specified tension. Then, affix ancillary items using the stainless steel bolt provided with the product.

The strength of the S-5-V clamp is in its simple design. The patented setscrews will slightly dimple the metal seam material but not pierce it—leaving the roof manufacturer’s warranty intact.

S5V-installSteps

Please note: The above image illustrates the S-5-V. The steps remain the same for the S-5-V Mini; however, there will only be one setscrew on the clamp.

Downloads

Product Brochure

adobePDFicon